We produce and sell mastering system, electronic forming machine, hologram embosser, gluing (adhesive) machine and die cutting machine. All of these machines are made in China and have good performance.

We also offer free training until you are familiar with our machines and technology.

List of Holography machinery

1. 2D/3D Master Shooting System

2D/3D master shoooting lab including Microprocessor-Controlled Automatic Positioning Equipment, Optical Table, He-Cd laser, laser power controller, opticals, chemical, silver coatings and other technology transfer.

2. Dot-matrix Master Shoooting System

To make Dot-matrix hologram movement effect onto small holographic master. Usually, we make small hologram master unit and recombine it into big master.

3. holographic master Recombination Machine(for dot-matrix master)

To recombine small master into big master shim.

4. Electronic Forming Machine
Electronic forming machine duplicates nickel hologram operation shim which is used for sticker embossing. Then we fix nickel hologram operation onto embosser's sylinder and emboss metallized PET film which will have hologram image on it.

5. Narrow Hard Web Embosser
Narrow web hard embosser can emboss aluminum metallized PET film(holographic sticker film ), transparent PET film, aluminum foil,etc. To emboss holography image, embosser should have compressed air pressure between three cylinders in high tempreture. We have two type hard embosser, old mold and new mold. Old mold holography hard embosser cannot emboss metallized film foil very precised in roll. Embossed holography film have gap between each panel and the gap of panel is not precise. New mold embosser can emboss foil very precisely and coutinously with same gap between two stickers. So the sticker made by new mold embosser can be applied automatic by machine.

a. Old mode of hard embosser

b. New mode of hard embosser which can emboss precisely

6. Laminator
To laminate silicon paper(liner) and holography film together by adhesive. Adehensive r(usually, solvent based) is same adhesive for normal self-sticke.

7. Wide Web Soft Embosser
To emboss transparent holographic film in wide web. The hologram film can be BOPP, PET and PVC film.

8. Hologram Sticker Automatic Die-cutting Machine

This macine can die-cut hologram sticker in roll precisely and fast. It can die-cut one row or two rows sticker per time. It can die-cut maximum 260 times per minute. It can slit sticker into small roll at mean time of die-cutting.

9.Manual Die-cutting punch

Manual die-cutting punch can die-cut sticker into sheetin size of 160mm*160mm. It die-cut row by row manually.

Holography Master Shooting System

Master shooting System has two type. One is 2D/3D mater shooting System, another is Dot-matrix master shooting System.

2D/3D mater shooting System
There're two type of 2D/3D master shooting. One way is to shoot master by H1 glass to make hologram text or image in background. Another way is to shoot master by hologram image maker facility directly.To shoot master by hologram image maker facility directly, all forground image and background image can be shooted in same way(no need to make H1 glass for background first). It's much easily way than to make background by H1 glass. Master shooted by hologram image maker facility also is much shining and clearn without noise wrinkle than the master shooted in another way, especially, on big rainbow area. To shoot master by hologram image maker facility, we need automatic position localization equipment to locate record glass position precisely. To shoot master by H1 for background, we have to control position platform manully.

Two different 2D/3D master shooting, we need two different position localization equipment, one is manual positioning equipment , another is automatic positioning equipment.

We have both type master shooting technology. To shoot master by hologram image maker facility is suggested because it's easier to learn and quality of master made is better.

He-Cd laser

This is the photo of He-Cd laser which is in my training room.

It's the breif image of He-Cd laser structure

Microprocessor-Controlled Automatic Position Localization Equipment for 2D/3D, kinematic movement, flip-flop, hidden text, floating effect.

Microprocessor-Controlled Automatic Positioning Equipment is 3D process machine who control the master shooting according to the pre-setting parameter. It can control position, distance and depth of holography will be shooted and how long time glass will be exposed to laser beam when shooting.

Specifications:

1.Voltage std.:-220V,50HZ, Power consumption <150W
2.Processor:2*57BYG060, 86BYG450B
3.Shutter:DC24V/0.5A, AC220V/2A
4.Value: Horizontal Direction 0.01mm, Vertical Direction: 0.01mm, viewing depth: 0.01mm
5.Times: Horizontal Direction<600 times, Vertical Direction<600 times, viewing depth Direction 1 time
6.Scope: Horizontal Direction<200.00mm Vertical Direction<220.00mm viewing depth<80.00mm
7.Waiting time: Toff: 1-999 second
8.Exposure time: Ton: 1-999 second
9.speed: 0-9 adjustable

Optical Table

Specifications:

Load weight: 500~800 kg
Solid Frequency Horizontal Direction < 1~1.8HZ Vertical Direction < 1.1~1.8HZ
Maximum anti-vibration value 1.1*10-3~ 3.5*10-3
Table Flat Smoothness: 0.10 mm/m2
Maximum relative displacement: 0.22 nm~0.10 nm
L*W*H: 1800mm*1200mm*140mm
The weight of whole System will be 300 kg.

This is the photo of optical table and optics which is in my training room. The main facility on top side of photo is Microprocessor-Controlled Automatic Position Localization Equipment

The laser beam splitter seperate one beam into two beam

2D/3D holography master shooting System includes shooting system platform£¬Microprocessor-Controlled Automatic Position Localization Equipment£¬He-Cd laser and laser power; kinds of optics£¬kinds of chemicals for developing, fixing, bleaching glass, silvering holography glass£¬other equipemnts
Step 1. shoot master directly by hologram image maker facility or shooting H1 glass, shooting background, shooting 2D
Step 2. Silvering holography glass

Dot-matrix master Shooting Machine

Dot-matrix master shooting machine has 3 different types in resolution(800 DPI, 1200 DPI, 2400 DPI) according to different customer's requirement..

Dot-matrix hologra mmaster shooting machine composed of opetical tabel, He-Cd laser, Programmable controller, acurate platform, Optics bridge, computer and software.

Specifications:

1. Platform dimension: 900mmX900mmX500mm
2. Resolution: 50 DPI adjustable
3. Exposure speed: 15-25 dots per second (depends on which mold)
4. Laser engrave area: 150mm¡Á150mm
5. Power: 220V, 1KVA

Hologram Master Recombination Machine(for dot-matrix master)

This machine has small floor space, the recombination master is large in size. The computer automaticallies control, can recombine different shape on the same plate. The recombination is high in precision. It is reliable that the machine is steady

Specifications:

1. Maximum recombination area: 650mm*1250mm
2. Recombination precision: 0.01mm
3. Recombination function: Misplace, slope , blank, reverse
4. The computer automaticallies control, Windows operates interfaces
5. Power: 80V/2KW
6. Dimension: 1800mm*1300mm*1750mm
7. Weight: 1300 kg

Electronic Forming Machine

After hologram glass master shooted by laser beam sensitive glass by 2D/3D master shooting system(or, have dot-matrix hologram recombined into big size on some plastic film) and had one sliver layer on the surface of the glass after slivering process, we have to put the holography glass master into soft electronic forming tank to produce holography master origination which image is nagative to final hologram sticker. After 70-90 minutes electronic forming, we'll get one holography shim copy which is called nickel holography master origination(mother master) from the surface of glass master. Then we put the nickel holography master origination into another tank, hard electronic forming tank which can duplicate another piece positive operation holography shim which is a little bit harder than soft shim for hard embossing and soft embossing. Small tank is for duplicating small master which is used to emboss holography sticker and big tank is duplicating big master which is used to produce holography film.

Small holography electronic forming machine.

Soft electronic forming tank to produce holography master origination(soft) and hard electronic forming tank to produce holography operation shim for embossing¡£Some electronic forming tank can duplicate lologram nickel shim in size of 300mm*300mm.

Big holography electronic forming machine.

Small Holography electronic forming machine
Specifications of small holography electronic forming machine tank:
1. Max electronic formed size:250MM*250MM
2. Voltage std.:220V 50HZ
3. Power consumption:1KW
4. Dimension: 800MM*800MM*1000MM
5. Weight: 150KG

Specifications of holography electronic forming machine power(controller):
1. Voltage std.:220V 50HZ
2. Power consumption:1.5KW
3. Dimension: 400MM*600MM*800MM
4. Weight: 100KG

Big Holography electronic forming machine(size of it can be customized design)
Specifications of Big holography electronic forming machine tank:
1. Max electronic formed size:1600MM*900MM
2. Voltage std.:220V 50HZ
3. Power consumption:2KW
4. Dimension: 2200MM*800MM*1200MM
5. Weight: 180KG

Specifications of holography electronic forming machine power(controller):
1. Voltage std.:220V 50HZ
2. Power consumption:1KW
3. Dimension: 500mm*400mm*1200mm
4. Weight: 150KG

Old Mold Narrow Web Hard Holography Embosser

Narrow web hard holographic embosser is designed for producing 160MM width holographic products, such as holographic labels, narrow web holographic film, hologram aluminum foil,etc.

Specifications:
1. Max embossing dimension : 160*156MM/sheet
2. Embossed film thickness: 0.012MM-0.12MM
3. Max rewind & unwind rolls diameter: 500MM
4. Temperature scope: 0-180¡æ(Adjustable)
5. Embossing speed: 0M-30M/Min(Adjustable)
6. Counter scope: 0-99999 (Adjustable)
7. Shim size: <160*156*0.05 MM
8. Shim lift: 5,000M-10,000M/Shim
9. Voltage std.: 220V 50HZ
10. Power consumption: 3KW
11. Compressed air needed: 0-5Kg/cm2 (Adjustable)
12. Embosser dimension: 1300MM*750MM*120MM
13. Embosser weight: 500KG

New Mold Narrow Web Hard Holography Embosser

Narrow web hard holographic embosser is designed for producing 160MM width holographic products, such as holographic labels foil in roll which has precise gap between two stickers. Sticker embossed by this embosser can be applied automatic by sticker application machine. Comparing to similar mold embosser made in USA and Germany, our embosser has same quality and much lower price. This hologram embosser can emboss slim hologram seal of cigarette packaging.

Characteristics:

1.Rectify a deviation and put one automatically, rewind smoothly with little deviation..
2. Intellectual temperature control, it is accurate in temperature control when embossing.
3. Automatic control or manual control to set unwind and rewind parameter,
4. Automatic control or manual control to adjust juction of hologrma nickel shim.
5.The structure is reasonable in design, it is flexible and convenient to dismantle

Specifications:
1. Width of door: 300mm(MAX)
2. Embossing are: 152.4mm(standard)----161.0mm(customized)
3. Power : 220V or 380V, 4KW
4. Air pressure when embossing : 8kg/cm2(0.8mpa)
5.Dimension: 1850MM*900MM*1200MM
6.Weight: 700kg

Laminator
The machine is very simple and Lamination machine which laminates aluminum metallized PET film(holographic sensitive pressure label film) together with silicon paper(liner) by adhesive. It's simple and easily run machine made just for our holographic sticker lamination.

Specifications:
Specifications of laminator body(three parts):
1. Machine body weight: 650KG
2. Machine body dimension: L5900MM*W450MM* H1700MM
Three parts of machine: 210mm*65mm*70mm, 160mm*90mm*70mm, 90mm*90mm*180mm

Specifications of laminator's controller:
1. Controller weight: 50KG
2. Controller dimension: L600MM*W450MM* H950MM
3. Power.:220V 50HZ
4. Power consumption:5KW

1200 mm Wide Web Soft Holography Embosser

This machine is suitable to emboss many kinds of film, such as transparent BOPP, PVC, PET film, extensively used in manufacturing holographic film for anti-counterfeit hologram packing material. Laminating together with holographic film, lots boxes have fake preventing packaging and improving their appearance with shining and vivid hologram effect. To metallize these transarent BOPP, PVC, PET film, we can get aluminum metallized hologram film in different color, such as silver, red, blue, green, yellow,ect.

Performance and Characteristics:
1. It only requires 20 minutes of heating to achieve work requirement, automatically coordinating with cooling system and realizing heat energy balance. Furthermore, It not only can save energyby two-third, but also work constantly and stably.
2. Jointing seam will not expand with hot.

1.Width of Roll:1320mm
2.Width of Press Film:1250mm
3.Max. Diameter of winding and rewinding:580mm
4.Coling system: Oil and water cool system
5.Speed of embossing:0M-50M/Min.
6.Meter Counter: Automatic meter counter
7.Thickness of Material(Film, BOPP, PET, PVC):0.012-0.200mm
8.Temperature controlling:temp.0--200C
9.Compressed air needs: 6 ATM
10.Frequency-change speed-change Motor:2.2KW
11.Auto temperature perseverance system:12.5KW
12. Power.: 220V 50HZ
13.Total Power consumption:16 KW
14.Weight of Main Machine:1.5T
15.Embosser dimension of Main Machine: W1800*L1200*H1500mm

Automatic Die-cutting Machine

This automatic die-cutting machine is very good to die-cut hologram sticker precisely and fast. It's suitable to die-cut hologram stickers in roll very precisely by tracing white register mark. It has slitter which can slit big hologram sticker roll into small rolls.

Performance and Characteristics:

1. Automatic anti-deviation when unwinding foil. It can improve precision of unwind to decrease deviation in horizontal direction.
2. Intelligent photoelectricity location position ability. It can locate the right position of white register mark precisely.
3. Computer control technology. It's easily to set parameters for die-cutting according different speed and size of stickers
4. Rotation ability of die-cutting mold. It can help to adjust mold position precisely and can die-cut sticker in some special direction.
5. Rewind independently which improves to rewind the waste film smoothly.
6. Two sets rewind to help rewind small rolls after slitting smoothly.

Main Parameters:

1. Die cutting width and length: a.200X200mm2         b.300X200mm2
2. Width of foil go through: 340 mm
3. Die-cutting speed: 250 times/min (max)
4. Register mark Positioning precision: 0.10mm
5. Precision to rectify a deviation: 0.15 mm
6. Max unwind Diameter: 500mm, Max rewind Diameter: 400mm, Max rewind Diameter for waste film: 350mm
7. Min slitting width: 12mm
8. Thickness of liner: > 65/g glassine liner
9. Power: 220V 2000W
10: Dimension: 450mm*900mm*1400mm
11. Weight: 700Kg

Mastering system

Specifications:

Mastering system(new)------------45,000 US$

Mastering system(old)------------35,000 US$

SHANGHAI HENGLEI HOLOGRAM CO,.LTD

address: Unit 406, 4/F, Building B, 311 Siping Rd, Shanghai,China

Tel: 86-21-61236144

Fax: 86-21-61236144

E-mail: service@hlhologram.com

Contact Person: Mr.David Song(Marketing Manager)

Mobile: 8613002188868 (David Song)

E-mail: zxsong@hlhologram.com

homepage: http://www.hlhologram.com